Self Drilling Anchor Bolt - R Type
Susun Self Drilling Anchor Bolt system is a fully threaded hollow core bar that is initially a server as a drill rod with a lost bit, and later, once grouted in, it becomes an anchor tendon that can be stressed and locked off with a nut.
Susun Self Drilling Anchor Bolt system provides the optimal solutions for nailing, bolting, micro piling and as ground anchors in difficult ground and rock conditions.
Susun Self Drilling Anchor Bolt system provides the optimal solutions for nailing, bolting, micro piling and as ground anchors in difficult ground and rock conditions.
Technical Data
| Bar Size | R25N | R32L | R32N | R32S | R32SS | R38N | R51L | R51N |
| Nominal outer diameter(mm) | 25 | 32 | 32 | 32 | 32 | 38 | 51 | 51 |
| Nominal inner diameter(mm) | 13 | 21 | 20 | 18 | 15 | 24 | 35 | 33 |
| Cross section area of bar(mm2) | 240 | 310 | 350 | 430 | 480 | 590 | 740 | 940 |
| Ultimate load(kN) ≥ | 200 | 250 | 280 | 360 | 405 | 500 | 550 | 800 |
| Yield load(kN) ≥ | 150 | 190 | 230 | 280 | 300 | 400 | 450 | 630 |
| Ultimate strength(N/mm2) ≥ | 830 | 800 | 800 | 830 | 840 | 840 | 740 | 850 |
| Yield strength(N/mm2) ≥ | 620 | 610 | 650 | 650 | 620 | 670 | 600 | 670 |
| Elongation A5(%)≥ | ≥ 6.00 | |||||||
| E Modulus (GPa) | 178 | 180 | 185 | 205 | 180 | 202 | 182 | 185 |
| Nominal weight (kg/m) | 1.9 | 2.4 | 2.7 | 3.4 | 3.8 | 4.7 | 5.9 | 7.4 |
| Thread (left-hand) | CMP Internal standard and based on ISO 10208 and 1720 etc. | |||||||
| Steel grade | ASTM A519-03 5140/EN 10083-1 41Cr4 | |||||||
| Hardness(HB) | 230-300 | |||||||
Special Sizes
| Bar Size | R38/15 | R51/28 | R63/43 | R76/56 |
| Nominal outer diameter(mm) | 38 | 51 | 63 | 76 |
| Nominal Inner diameter(mm) | 23 | 34 | 47 | 56 |
| Cross section area of bar(mm2) | 640 | 1,020.00 | 1,360.00 | 1,860.00 |
| Ultimate load(kN) | 530 | 840 | 1,160.00 | 1,380.00 |
| Yield load(kN) | 425 | 690 | 930 | 1,100.00 |
| Ultimate strength(N/mm2) | 820 | 820 | 850 | 740 |
| Yield strength(N/mm2) | 664 | 670 | 680 | 590 |
| Elongation A5(%) | > = 6.00 | |||
| E Modulus (GPa) | 200 | 185 | 190 | 190 |
| Nominal weight (kg/m) | 5 | 8 | 10.7 | 14.6 |
| Thread | Susun Internal Standard; Left Hand or Right Hand | |||
| Steel grade | ASTM A519-03 5140/EN 10083-1 41Cr4 | |||
| Steel grade ( KSI) | 96 | 98 | 99 | 86 |
| Hardness(HB) | 240-310 | |||
